Group Mfg. Services Inc.

San Jose Facility

Inspection

Email groupmfg@pacbell.net

Group Mfg. Services 1928 Hartog Dr. San Jose, Ca 95131 Phone (408) 436 1040 Fax (408) 436-7967 

Home | RC Facility | Contact Us | Sheet Metal | Machining | Plastics | Assembly | Inspection | Employment | Map & Directions

 

 

 

GMS, Inc.
is a Registered
ISO 9001-2000
Company

 

Click Here For Parts Gallery

 

 

At GMS, Inc. Quality is a business methodology that aligns the activities of all employees in the organization
with the common focus of customer satisfaction through continuous improvement in the quality of all activities, goods and services. We apply Mil Spec. Inspection Standards in each department All processes are documented from the start of a job and though-out the manufacturing process. This regimented procedure will assure that the consistency in quality is maintained at the very highest level.
 

~ Inspection Equipment ~


 

Sheet Metal Division

 

Machining Division

 

  • 500 Sq Ft. Air Conditioned Inspection Lab
  • Inspection Tool Calibration per MIL 104
  • Inspection per MIL Std 105e

1 Starrett Pink Granite Surface Plate 4' x 8'
5 Surface Plates on the Shop Floor 2' x 3'
1 10" x 12" x 16" Angle
1 Digital Height Gauge 24"
2 Dial Height Gauges 24"
2 Vernier Calipers 40"
1 Vernier Calipers 24"
1 Digital Calipers 8"
1 Digital Calipers 12"
1 Digital Calipers 24"
2 Grade 2 81pc Gage Blocks
1 Set Pin Gauges .011 .500
1 Sine Bar 5"
2 Dial Indicators
1 Set Micrometers
1 Chamfer Gauge
2 Bevel Protractors
5 1 2 3 Blocks
1 Set Thread Gages

 

  • 300 Sq Ft. Air Conditioned Inspection Lab
  • Inspection Tool Calibration per MIL 104
  • Inspection per MIL Std 105e

1 Wenzel XO 87 CMM
1 Mitutoyo Series 264 DP 2DX
1 Mitutoyo BH 70 CMM
2 Surface Plates 24" x 36"
1 Set 0" to 6" Carbide Tip Micrometer
2 Sets Gauge Blocks
2 Sets Gauge Pin (0.060-0.75 by 0.001)
1 Height Gauge 12"
1 Height Gauge 24"
1 Digital Height Gauge 24"
1 Digital 0" - 1" Micrometer
1 Digital 1" - 2" Micrometer
1 Digital Calipers 8"
1 Digital Calipers 12"
1 Digital Calipers 24"

 

 

WENZEL XO 87 CMM utilizes Renishaw TP20 or TP200
probing systems and offers volumetric accuracy of
2.5 microns. Use of fine grain, native-black granite
produces thermal stability with natural vibration
dampening. It has 2 measuring envelopes,with max3D
measuring speed of 700 mm/sec and max acceleration
of 2,000 mm/sec².Measurement ranges vary from
500 x 700 x 500 mm to 500 x 1,000 x 500 mm
and 800 x 1,000 x 700 mm to 800 x 1,500 x 700 mm

 

 

 

 


(click on any links below to continue)

Home | RC Facility | Contact Us | Sheet Metal | Machining | Plastics | Assembly | Inspection | Employment | Map & Directions

 

Comments Send To WebMaster